Our to produce better steel-based products are the main used in industrial manufacturing various types Heat resistant steelGX40CrSi13 plate,GX40CrSi13 Round Bar,GX40CrSi13 forgings,GX40CrSi13 suppliers, GX40CrSi13 Stock,GX40CrSi13 sheet, GX40CrSi13 flat bar, GX40CrSi13 pipe,GX40CrSi13 tube,GX40CrSi13 mould,GX40CrSi13 round ingot,GX40CrSi13 cold-rolled steel,GX40CrSi13 coil,GX40CrSi13 strap steel,GX40CrSi13 hot-rolled steel,GX40CrSi13 medium plate, GX40CrSi13 heavy plate,GX40CrSi13 shapped bar,GX40CrSi13 hexahedral bar,GX40CrSi13,GX40CrSi13 slab ingot,GX40CrSi13 slab,GX40CrSi13 price,GX40CrSi13 square bar,GX40CrSi13 square steel,GX40CrSi13 wire.Extending the industrial all kinds of mechanical industrial parts machining and, at the same time, using fine heat treatment process,tempering,hardening,heating,bright annealing,rotary hearth.chemical composition and Improving mechanical properties of GX40CrSi13.

Current Location:Home » Products » Heat resistant steel » GX40CrSi13

Product category

GX40CrSi13

Data Table for:Products: Heat resistant steel:GX40CrSi13

GX40CrSi13 properties and heat treatment forged piece, Including GX40CrSi13 application and specifications, We have all specifications,Including GX40CrSi13 steel plate, GX40CrSi13 sheet, GX40CrSi13 square steel, GX40CrSi13 flat bar,GX40CrSi13 round bar,GX40CrSi13 forgings, we can own production and sales.


Introduction to Our Products:

Specialized high quality steel

We have the advantages of equipment, technologies and price

forged/hot rolling/ extrusion of steel


We can produce the GX40CrSi13 has the following specifications:

Round bar steel: 1mm to 3000mm

Square-shape steel: 1mm to 2000mm

Plate steel:0.1mm to 2500mm

Width: 10mm to 2500mm

Lenth: We can supply any lenth based on the customer's requirement.

Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

Tubings: OD: φ6-219 mm, with wall thickness ranging from 1-35 mm.

Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement

Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement

Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.

Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.

We serve you with our honesty, integrity, and professionality.


Chemical composition % of the ladle analysis of grade GX40CrSi13 and Standards

C
Si
Mn
P
S
Cr
Ni
Other
0.30~0.45
1.0~2.5
0.5~ 1.0
0.035
0.030
12.0~14.0




Machining performance

Download GX40CrSi13 the mechanical properties of the report, the report provides detailed performance analysis and application. Download >>


Principal Design Features

One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.


Machinability

Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.


Heat Treatment

CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.


Welding

Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.


Forging

Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.





Hot tags:GX40CrSi13 steel plate, GX40CrSi13 sheet, GX40CrSi13 square steel, GX40CrSi13 flat bar,GX40CrSi13 round bar,GX40CrSi13 forgings