ГОСТ XH70BMTЮ Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » XH70BMTЮ
XH60BT
XH62MBKЮ
XH62MBKЮ-BД
XH65MB
XH65MBy
XH65BMTЮ
XH67MBTЮ
XH70Ю
XH70MBTЮБ
XH70BMЮT - ГОСТ
- Russia
- Russia COST standard deformation of high temperature alloy
Chemical composition % of the ladle analysis of grade XH70BMTЮ
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | W(%) | Co(%) | B(%) | Al(%) | Ti(%) | Other(%) |
| Max 0.12 | Max 0.60 | Max 0.50 | 0.015 | 0.01 | l3.0-16.0 | Balance | 2.00-4.00 | 5.00-7.00 | Max 0.50 | Max 0.02 | 1.70-2.30 | 1.80-2.30 | Ce: Max 0.02 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 525 (≥) | 398 (≥) | 31 | 34 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 431 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 314 (≥) | 715 (≥) | 41 | 41 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 444 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 912 | 265 | 925 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| XH70BMTЮ | Russia GOCT standard deformation of high temperature alloy grades and chemical composition |
||
| XH70BMTЮΦ | Russia GOCT standard deformation of high temperature alloy grades and chemical composition |