UNS S35500 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » S35500
S17700
S17700
17-7PH
17-7PH
AM-350(Type633)
AM-350(Type633)
AM-350(Type633)
AM-350(Type633)
AM-355(Type634)
AM-355(Type634) - UNS
- USA
- precipitation hardening
Chemical composition % of the ladle analysis of grade S35500
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | N(%) |
| 0.10-0.15 | 0.5 | 0.5-1.25 | Max 0.04 | Max 0.03 | 15.0-16.0 | 15.0-16.0 | 2.5-3.25 | 2.5-3.25 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 598 (≥) | 146 (≥) | 31 | 44 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 213 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 432 (≥) | 198 (≥) | 42 | 11 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 442 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 649 | 729 | 193 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 564 S35500 | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
||
| A 693 S35500 | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
||
| A 705 S35500 | Age-Hardening Stainless Steel Forgings |
||
| S35500 | Precipitation Hardenable Chromium Nickel Molybdenum Stainless Steel |
||
| SA-564 S35500 | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
||
| SA-693 S35500 | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
||
| SA-705 S35500 | Specification for Age-Hardening Stainless Steel Forgings |
||
| A 564 S35500 | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
||
| A 693 S35500 | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
||
| A 705 S35500 | Age-Hardening Stainless Steel Forgings |
||
| S35500 | Precipitation Hardenable Chromium Nickel Molybdenum Stainless Steel |
||
| SA-564 S35500 | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
||
| SA-693 S35500 | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
||
| SA-705 S35500 | Specification for Age-Hardening Stainless Steel Forgings |
||
| A 564 634 | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
||
| A 693 Type 634 | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
||
| A 705 634 | Age-Hardening Stainless Steel Forgings |
||
| A 959 Type 634 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
||
| S35500 | S35500 |