3Cr2Mo Enquiry | Print this page
- Category
- Type
- Steel grade
- Country
- USE
- Grades
- Special Alloy
- » 3Cr2Mo
5Cr4Mo3SiMnVA1
3Cr3Mo3W2V
5Cr4W5Mo2V
8Cr3
4CrMnSiMoV
4Cr3Mo3SiV
4Cr5MoSiV
4Cr5MoSiV1
4Cr5W2VSi
7Mn15Cr2A13V2WMo - China
- Alloy tool steel - Plasticity steel mold
Chemical composition % of the ladle analysis of grade 3Cr2Mo
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Mo(%) |
0.28~0.40 | 0.20~0.80 | 0.60~1.00 | ≤0.030 | ≤0.030 | 1.40~2.00 | 0.30~0.55 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
957 (≥) | 357 (≥) | 24 | 32 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 311 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
958 (≥) | 625 (≥) | 21 | 41 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 424 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
445 | 582 | 989 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |