AS 4150 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » 4150
CA500
CA1010
CK10B55
CW300
CK1073
X1320
X3312
4037
4130
4140 - AS
- Australia
- Australia Structural steel
Chemical composition % of the ladle analysis of grade 4150
| C(％) | Si(％) | Mn(％) | P(％) | Cr(％) | Mo(％) |
| 0.48-0.53 | 0.10-0.35 | 0.75-1.00 | 0.040 0.040 | 0.80-1.10 | 0.15-0.25 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 251 (≥) | 142 (≥) | 33 | 32 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 444 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 368 (≥) | 543 (≥) | 14 | 23 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 422 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 624 | 977 | 421 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 176 S41500 | Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip |
||
| A 240 S41500 | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| A 268 S41500 | Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
||
| A 276 S41500 | Stainless Steel Bars and Shapes |
||
| A 473 S41500 | Stainless Steel Forgings |
||
| A 479 S41500 | Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
||
| A 815 CRS41500 | Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings |
||
| A 815 WPS41500 | Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings |
||
| A 959 S41500 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
||
| A 988 S41500 | Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
||
| S41500 | Chromium Nickel Molybdenum Martensitic Stainless Steel (F6NM) |
||
| SA-240 S41500 | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| SA-268 S41500 | Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
||
| SA-276 S41500 | Specification for Stainless Steel Bars and Shapes |
||
| SA-479 S41500 | Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
||
| SA-731 S41500 | Seamless, Welded Ferritic, and Martensitic Stainless Steel Pipe |
||
| SA-815 CRS41500 | Specification for Wrought Ferritic, Ferritic /Austenitic, and Martensitic Stainless Steel Piping Fittings |
||
| SA-815 WPS41500 | Specification for Wrought Ferritic, Ferritic /Austenitic, and Martensitic Stainless Steel Piping Fittings |
||
| A 176 S41500 | Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip |
||
| A 240 S41500 | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |