AFNOR 55NiCrMoV7 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » 55NiCrMoV7
40CrMoV13
40NiCrMo16
40NiCrMo16
0NiCrMoV16
0NiCrMoV16
45CrMoV6
45CrMoV6
55CrNiMoV 4
55CrNiMoV 4
55NiCrMoV7 - AFNOR
- France
- Carbide for cutting tools
Chemical composition % of the ladle analysis of grade 55NiCrMoV7
| C(％) | Si(％) | Mn(％) | Cr(％) | Ni(％) | Mo(％) | V(%) |
| 0.50-0.60 | 0.10-0.40 | 0.50-0.80 | 0.70-1.00 | 1.50-2.00 | 0.30-0.50 | 0.05-0.15 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 721 (≥) | 798 (≥) | 42 | 44 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 422 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 228 (≥) | 347 (≥) | 24 | 14 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 411 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 938 | 666 | 425 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 55NiCrMoV7, 1.2714 | The grades are used in the production of forging machine components - forging dies, parts of extrusion presses, hot knives or deburring plates. |
Relevant products
55NiCrMoV7 Equivalent Grade Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| 1.2714 Hot-Work Mould Steel Flat Bar Stock(2019-09-03) | Select | 0 | Select | Enquiry | ||
| 1.2714 Stock list 2020-06-15 | Select | 0 | Select | Enquiry | ||
| 1.2714 QT Bar Stock List 2020-06-15 | Select | 0 | Select | Enquiry |