Structural Steel 1025, A.29 1025, 1025, G10250, These products have been used typically for use in fabrication of fittings, but usage is not limited to such applications. These products are not typically used for deep forming or cupping operations. to SAE AMS 5046D (2012)

1025 Structural Steel Properties Data

Chemical Composition Description Mechanical Properties Physical Properties Applications Heat Treatment Machinability

Chemical Composition of steel 1025 Structural Steel: SAE AMS 5046D (2012) ,Cross Reference

1025 Structural Steel Applications and Specifications

 1025

  • SAE AMS 5046D (2012) - Carbon Steel, Sheet, Strip, and Plate (SAE 1020 and 1025) Annealed
  • SAE AMS 5075F (2001) - Steel Tubing, Seamless 0.22 - 0.28C (SAE 1025) Cold Drawn and Stress Relieved
  • SAE AMS 5077G (2006) - Steel Tubing, Welded (0.22 - 0.28C) (SAE 1025) Normalized or Stress Relieved
  • SAE AMS-S-7952A (1998) - Steel, Sheet and Strip, Uncoated, Carbon (1020 and 1025) (Aircraft Quality)
  • SAE AMS-T-5066A (2005) - Tubing, Carbon Steel (1025), (Aircraft Quality)
  • A 1040 (2010) - Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
  • A 108 - Steel Bar, Carbon and Alloy, Cold-Finished
  • A 29/A 29M (2012) - Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
  • A 510/A 510M (2011) - General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
  • A 512 (2006) - Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
  • A 513/A 513M (2012) - Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
  • A 519 (2006) - Seamless Carbon and Alloy Steel Mechanical Tubing
  • A 575 (2007) - Steel Bars, Carbon, Merchant Quality, M-Grades
  • A 576 (1990) - Steel Bars, Carbon, Hot-Wrought, Special Quality
  • A 830/A 830M (2011) - Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
  • SAE J 1397 (1992) - Estimated Mechanical Properties and Machinability of Steel Bars
  • SAE J 403 (2009) - Chemical Compositions of SAE Carbon Steels

Mechanical properties at room temperature for 1025 Structural Steel: SAE AMS 5046D (2012)

Tensile Strength,Rm(MPa)

Yield Strength,Rp 0.2(MPa)

Impact,Kv/Ku(J)

Elongation,A(%)

Reduction of area,(%)

Hardness

Product shapes we supply:

Cross Reference, Equivalent, Similar of 1025 Structural Steel grade:

A-29 1025 1025 G10250

Conditions & Properties

  • +A Soft annealed
  • +AC Annealed to achieve spheroidization of the carbides
  • +QT Quenched and tempered
  • +WW Warm worked
  • +N Normalized
  • +NT Normalized and tempered
  • +AT Solution annealed
  • +C Cold drawn / Hard
  • +CR Cold rolled
  • +PE Peeled
  • +T Tempered