CNS Austenitic 309 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » Austenitic 309
CNS XM27
CNS 403
CNS 410
CNS 410S
CNS 421J1
CNS 420J2
CNS 429J1
CNS 440A
304-TPD
316-TPD - CNS
- China
- China Taiwan Heat-Resistant Steel
Chemical composition % of the ladle analysis of grade Austenitic 309
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) |
| Max 0.20 | Max 1.00 | Max 2.00 | 0.04 | 0.03 | 22.0-24.0 | 12.0-15.0 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 586 (≥) | 883 (≥) | 32 | 22 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 323 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 819 (≥) | 791 (≥) | 22 | 32 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 224 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 869 | 681 | 499 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 167 Type 309 | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
||
| A 249 TP309 | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
||
| A 276 309 | Stainless Steel Bars and Shapes |
||
| A 312 TP309 | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
||
| A 314 309 | Stainless Steel Billets and Bars for Forging |
||
| A 403 WP 309 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
||
| A 409 TP309 | Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
||
| A 473 309 | Stainless Steel Forgings |
||
| A 511 MT309 | Seamless Stainless Steel Mechanical Tubing |
||
| A 554 MT 309 | Welded Stainless Steel Mechanical Tubing |
||
| A 580 Type 309 | Stainless Steel Wire |
||
| A 813 Grade TP 309 | Single- or Double-Welded Austenitic Stainless Steel Pipe |
||
| A 814 Grade TP 309 | Cold-Worked Welded Austenitic Stainless Steel Pipe |
||
| A 959 Type 309 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
||
| A 167 S30900 | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
||
| A 276 S30900 | Stainless Steel Bars and Shapes |
||
| A 314 S30900 | Stainless Steel Billets and Bars for Forging |
||
| A 473 S30900 | Stainless Steel Forgings |
||
| A 580 S30900 | Stainless Steel Wire |
||
| S30900 | Chromium Nickel Heat Resisting Steel |
Relevant products
Austenitic 309 Equivalent Grade Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| UNS K30960(VIM+ESR) Bright Round Bar | Dia.22mm | Round Bar | Kgs | 50 | Hot-Rolled+Annealed+black | Enquiry |