CNS CNS 316 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » CNS 316
CNS 304
CNS 304L
CNS 304N1
CNS 304N2
CNS 304LN
CNS 304J1
CNS 304J2
CNS 305
CNS 309S
CNS 310S - CNS
- China
- China Taiwan Stainless steel
Chemical composition % of the ladle analysis of grade CNS 316
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) |
| Max 0.08 | Max 1.00 | Max 2.00 | 0.045 | 0.03 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 328 (≥) | 262 (≥) | 14 | 43 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 211 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 484 (≥) | 342 (≥) | 32 | 11 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 411 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 331 | 325 | 147 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| HNV5 | Steel for intake valves |
||
| S63005 | Steel for intake valves |
||
| Z1CNS17-15 | Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels |
||
| Z11CNS17-07Az | Stainless steels for general purposes. Plates, wide strips and strips |
||
| Z15CNS25-20 | Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels |
||
| Z17CNS20-12 | Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels |
||
| Z80CNS20-02 | Valve steels and alloys for internal combustion engines |
||
| 316 | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
||
| 316 | Austenitic Chromium Nickel Heat Resisting Steel |
||
| 316 | Austenitic Chromium Nickel Heat Resisting Steel |
||
| A 167 Type 316 | Stainless and heat resisting chromium-nickel steel plate, sheet and strip |
||
| A 182 F 316 | Forged low alloy and stainless steel piping components for use in pressure |
||
| 316 | Pipe, corrosion-resistant, stainless steel, seamless or welded |
||
| A 240 S31600 | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| A 249 S31600 | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
||
| A 269 S31600 | Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
||
| A 270 S31600 | Seamless and Welded Austenitic Stainless Steel Sanitary Tubing |
||
| A 276 S31600 | Stainless Steel Bars and Shapes |
||
| A 312 S31600 | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
||
| A 313 S31600 | Stainless Steel Spring Wire |
