CNS CNS 321 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » CNS 321
CNS 310S
CNS 316
CNS 316L
CNS 316N
CNS 316LN
CNS 316J1
CNS 316J1L
CNS 317
CNS 317L
CNS 317J1 - CNS
- China
- CNS standard stainless steel austenite size
Chemical composition % of the ladle analysis of grade CNS 321
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Ti(%) |
| Max 0.08 | Max 1.00 | Max 2.00 | Max 0.045 | Max 0.030 | 17.00-19.00 | 9.00-13.00 | Max 5xC% |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 964 (≥) | 793 (≥) | 13 | 33 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 144 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 766 (≥) | 684 (≥) | 34 | 21 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 141 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 641 | 461 | 442 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 240 S32100 | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| A 249 S32100 | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
||
| A 269 S32100 | Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
||
| A 276 S32100 | Stainless Steel Bars and Shapes |
||
| A 313 S32100 | Stainless Steel Spring Wire |
||
| A 314 S32100 | Stainless Steel Billets and Bars for Forging |
||
| A 358 S32100 | Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
||
| A 409 S32100 | Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
||
| A 473 S32100 | Stainless Steel Forgings |
||
| A 580 S32100 | Stainless Steel Wire |
||
| A 632 S32100 | Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service |
||
| A 778 S32100 | Welded, Unannealed Austenitic Stainless Steel Tubular Products |
||
| A 813 S32100 | Single- or Double-Welded Austenitic Stainless Steel Pipe |
||
| A 965 S32100 | Steel Forgings, Austenitic, for Pressure and High Temperature Parts |
||
| A814 S32100 | Cold-Worked Welded Austenitic Stainless Steel Pipe |
||
| F738 Class A2-50 S32100 | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
||
| F738 Class A2-70 S32100 | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
||
| F738 Class A2-80 S32100 | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
||
| F836 Class A2-50 S32100 | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
||
| F836 Class A2-70 S32100 | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
