CNS CNS 430F Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » CNS 430F
CNS 304N1
CNS 305
CNS 305J1
CNS 309S
CNS 310S
CNS 316
CNS 316L
CNS 321
CNS 347
CNS 430 - CNS
- China
- China Taiwan Stainless steel
Chemical composition % of the ladle analysis of grade CNS 430F
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) |
| Max 0.12 | Max 1.00 | Max 1.25 | 0.06 | 0.15 | 16.0-18.0 | 0.60 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 876 (≥) | 786 (≥) | 41 | 34 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 332 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 165 (≥) | 478 (≥) | 41 | 14 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 322 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 399 | 519 | 821 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| HNV5 | Steel for intake valves |
||
| S63005 | Steel for intake valves |
||
| Z1CNS17-15 | Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels |
||
| Z11CNS17-07Az | Stainless steels for general purposes. Plates, wide strips and strips |
||
| Z15CNS25-20 | Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels |
||
| Z17CNS20-12 | Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels |
||
| Z80CNS20-02 | Valve steels and alloys for internal combustion engines |
||
| A 314 S43020 | Stainless Steel Billets and Bars for Forging |
||
| A 473 S43020 | Stainless Steel Forgings |
||
| A 581 S43020 | Free-Machining Stainless Steel Wire and Wire Rods |
||
| A 582 S43020 | Standard Specification for Free-Machining Stainless Steel Bars |
||
| A 895 S43020 | Free-Machining Stainless Steel Plate, Sheet, and Strip |
||
| F738 Class F1-45 S43020 | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
||
| F738 Class F1-60 S43020 | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
||
| F836 Class F1-45 S43020 | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
||
| S43020 | Ferritic Chromium Free-Machining Stainless Steel |
||
| A 314 S43023 | Stainless Steel Billets and Bars for Forging |
||
| A 473 S43023 | Stainless Steel Forgings |
||
| A 581 S43023 | Free-Machining Stainless Steel Wire and Wire Rods |
||
| A 582 S43023 | Standard Specification for Free-Machining Stainless Steel Bars |