Cr2 Enquiry | Print this page
- Category
- Type
- Steel grade
- Country
- USE
- Grades
- Special Alloy
- » Cr2
T8Mn
T9
T10
T11
T12
T13
4CrW2Si
9SiCr
8MnSi
Cr06 - China
- Alloy tool steel - Measuring tool steel cutting tools
Chemical composition % of the ladle analysis of grade Cr2
| C(％) | Si(％) | Mn(％) | Cr(％) | Ni(％) | V(%) | Cu(%) |
| 0.95～1.10 | ≤0.40 | ≤0.40 | 1.30～1.65 | ≤0.20 | ≤0.20 | ≤0.30 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 933 (≥) | 499 (≥) | 13 | 42 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 343 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 929 (≥) | 317 (≥) | 12 | 42 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 442 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 356 | 514 | 541 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 0Cr23Ni13 | Corrosion resistance and heat resistance are better than 0cr19ni9 |
||
| 0Cr25Ni20 | Oxidation resistance is better than 0cr23ni13. Mostly used as heat resistant steel |
||
| 1Cr21Ni5Ti | Cold rolled stainless steel sheets and plates |
||
| 0Cr26Ni5Mo2 | Seamless stainless steel tubes for boiler and heat exchanger |
||
| 00Cr27Mo | Seamless stainless steel tubes for boiler and heat exchanger |
||
| 5Cr21Mn9Ni4N | Heat-resisting steel bars |
||
| 2Cr21Ni12N | Heat-resisting steel bars |
||
| 2Cr23Ni13 | Seamless stainless steel tubes for boiler and heat exchanger |
||
| 2Cr25Ni20 | Seamless stainless steel tubes for boiler and heat exchanger |
||
| 2Cr20Mn9Ni2Si2N | Heat-resisting steel bars |
||
| 1Cr20Ni14Si2 | Heat-resisting steel sheets and plates |
||
| 1Cr25Ni20Si2 | Heat-resisting steel sheets and plates |
||
| 2Cr25N | Heat-resisting steel sheets and plates |
||
| 8Cr20Si2Ni | Heat-resisting steel bars |
||
| NiCr20Ti | Heat resisting steels and nickel alloys |
||
| 2.4951 | Heat resisting steels and nickel alloys |
||
| NiCr22Mo9Nb | Heat resisting steels and nickel alloys |
||
| 2.4856 | Heat resisting steels and nickel alloys |
||
| NiCr23Fe | Heat resisting steels and nickel alloys |
||
| 2.4851 | Heat resisting steels and nickel alloys |
