ISO ISO X5CrNi18-9 Tube Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » ISO X5CrNi18-9 Tube
X10CrNi18 9E
X5CrNi18 12E
X6CrNi18 16E
X6CrNiTi18 10E
X5CrNiMo17 12 2E
X6CrNiMoTi17 12 2E
X2CrNiMo17 13 3E
X2CrNiMoN17 13 3E
X3CrNiCu18 9 3E
ISO X2CrNi18-10 - ISO
- ISO
- ISO standard austenitic stainless steel pressure seamless steel tube
Chemical composition % of the ladle analysis of grade ISO X5CrNi18-9 Tube
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) |
| Max 0.07 | Max 1.00 | Max 2.00 | Max 0.040 | Max 0.030 | 17.0-19.0 | 8.00-11.0 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 113 (≥) | 386 (≥) | 12 | 43 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 121 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 251 (≥) | 344 (≥) | 22 | 13 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 413 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 875 | 712 | 512 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| X5CrNi18-9 | Stainless steels - Chemical composition |
||
| X5CrNi18 9E | Steels for cold heading and cold extruding |
||
| X5CrNi18-9 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes |
||
| X5CrNi18-9 | Stainless steels - Chemical composition |