ASTM S5 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » S5
T31506
O7
T31507
S1
ASTM A182 F55
T41901
S2
T41902
S4
T41904 - ASTM
- USA
- Alloy tool steel
Chemical composition % of the ladle analysis of grade S5
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Mo(％) | V(%) |
| 0.50～0.65 | 1.75～2.25 | 0.60～1.00 | ≤0.030 | ≤0.030 | 0.10～0.50 | 0.20～1.35 | 0.15～0.35 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 734 (≥) | 676 (≥) | 34 | 13 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 342 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 798 (≥) | 575 (≥) | 13 | 44 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 243 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 141 | 884 | 325 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 314 S50100 | Stainless Steel Billets and Bars for Forging |
||
| S50100 | Chromium Heat Resisting Steel |
||
| A 314 S50200 | Stainless Steel Billets and Bars for Forging |
||
| A 387 S50200 | Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum |
||
| S50200 | Chromium Heat Resisting Steel |
||
| S50300 | Chromium Heat Resisting Steel |
||
| S50400 | Stainless Steel |
||
| S32404 | Duplex (Austenitic-Ferritic) Chromium Nickel Molybdenum Copper Nitrogen Stainless Steel |
||
| 304S51 | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
||
| HFS 304S51 | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
||
| CFS 304S51 | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
||
| HFM 304S51 | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
||
| 316S51 | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
||
| CFS 316S51 | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
||
| HFM 316S51 | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
||
| HFS 316S51 | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
||
| 316S52 | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
||
| 321S51(1010) | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
||
| 321S51(1105) | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
||
| 347S51 | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |