SAE 410 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » 410
L13454
L13455
L13703
L13704
L13705
L14203
L14204
L14205
320
360 - SAE
- USA
- China structural steel and alloy steel
Chemical composition % of the ladle analysis of grade 410
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | Cu(%) |
| Max 0.21 | Max 0.35 | 0.40-0.12 | 0.035 | 0.035 | 0.25 | 0.3 | 0.1 | 0.3 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 725 (≥) | 589 (≥) | 43 | 14 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 422 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 691 (≥) | 932 (≥) | 24 | 43 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 143 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 867 | 393 | 745 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 276 XM-28 | Stainless Steel Bars and Shapes |
||
| A 313 Type XM-28 | Stainless Steel Bars and Shapes |
||
| A 314 XM-28 | Stainless Steel Bars and Shapes |
||
| A 580 Type XM-28 | Stainless Steel Wire |
||
| A 955 XM-28 Grade 280 | Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement |
||
| A 955 XM-28 Grade 40 | Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement |
||
| A 955 XM-28 Grade 420 | Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement |
||
| A 955 XM-28 Grade 520 | Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement |
||
| A 955 XM-28 Grade 60 | Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement |
||
| A 955 XM-28 Grade 75 | Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement |
||
| A 959 Type XM-28 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
||
| SA-276 XM-28 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
||
| XM-28 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
||
| A 276 S24100 | Stainless Steel Bars and Shapes |
||
| A 313 S24100 | Stainless Steel Spring Wire |
||
| A 314 S24100 | Stainless Steel Billets and Bars for Forging |
||
| A 580 S24100 | Stainless Steel Wire |
||
| A 955 S24100 | Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement |
||
| S24100 | S24100 |
||
| 1.4108 | Stainless steels for rolled and forged products |
