SS SS 2304 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » SS 2304
STRl
STR3
STR4
STRll
STR600
STR616
SS 2340
SS 2301
SS 2302
SS 2303 - SS
- Sweden
- Swedish SS standard stainless steel and heat resistant steel
Chemical composition % of the ladle analysis of grade SS 2304
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) |
| 0.26-0.35 | Max 1.00 | Max 1.0 | Max 0.04 | Max 0.03 | 12.5-14.0 | Max 1.0 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 582 (≥) | 871 (≥) | 22 | 23 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 222 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 668 (≥) | 263 (≥) | 33 | 14 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 213 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 285 | 643 | 186 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 240 S32304 | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| A 276 S32304 | Stainless Steel Bars and Shapes |
||
| A 511 S32304 | Seamless Stainless Steel Mechanical Tubing |
||
| A 789 S32304 | Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service |
||
| A 790 S32304 | Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
||
| A 928 S32304 | Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal |
||
| A 949 S32304 | Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe |
||
| S32304 | Duplex (Austenitic-Ferritic) Chromium Nickel Nitrogen Stainless Steel |
||
| SA-240 S32304 | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| SA-276 S32304 | Specification for Stainless Steel Bars and Shapes |
||
| SA-789 S32304 | Specification for Seamless and Welded Ferritic /Austenitic Stainless Steel Tubing for General Service |
||
| SA-790 S32304 | Specification for Seamless and Welded Ferritic /Austenitic Stainless Steel Pipe |
||
| A 240 S32304 | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| A 276 S32304 | Stainless Steel Bars and Shapes |
||
| A 511 S32304 | Seamless Stainless Steel Mechanical Tubing |
||
| A 789 S32304 | Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service |
||
| A 790 S32304 | Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
||
| A 928 S32304 | Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal |
||
| A 949 S32304 | Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe |
||
| S32304 | Duplex (Austenitic-Ferritic) Chromium Nickel Nitrogen Stainless Steel |