KS STS316 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » STS316
STS303Se
STS304
STS304L
STS304N1
STS304N2
STS304LN
STS304J3
STS305
STS309S
STS310S - KS
- Korea
- KS standard austenite stainless steel bars(KS D3706-1992)
Chemical composition % of the ladle analysis of grade STS316
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) |
| Max 0.08 | Max 1.50 | Max 2.00 | Max 0.045 | Max 0.03 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 157 (≥) | 224 (≥) | 23 | 11 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 134 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 793 (≥) | 351 (≥) | 43 | 23 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 324 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 691 | 628 | 945 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| STS316 | Special alloys steel for chemical plant |
||
| STS316F | Stainless steel bars |
||
| STS316TKA | Stainless steel pipes for machine and structural purposes |
||
| STS316TKC | Stainless steel pipes for machine and structural purposes |
||
| STS316HTB | Stainless steel for boiler and heat exchanger tubes |
||
| STS316HTF | Steel tubes for fired heater |
||
| STS316TB | Stainless steel for boiler and heat exchanger tubes |
||
| STS316TF | Steel tubes for fired heater |
||
| STS316TBS | Stainless steel sanitary pipes |
||
| STS316TPD | Stainless lined steel pipe |
||
| STS316TPY | Large diameter welded stainless steel pipes |
||
| STS316WSA | Stainless steel wires for cold heading and cold forging |
||
| STS316WSB | Stainless steel wires for cold heading and cold forging |
||
| STS316CA | Cold - rolled formed stainless steel equal leg angles |
||
| STS316FB | Stainless steel blooms and billets for forgings |
||
| STS316L | Stainless steel bars |
||
| STS316LTB | Stainless steel for boiler and heat exchanger tubes |
||
| STS316LTBS | Stainless steel sanitary pipes |
||
| STS316LTPY | Large diameter welded stainless steel pipes |
||
| STS316LWSA | Stainless steel wires for cold heading and cold forging |