ABNT VAT 601 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » VAT 601
VRE 8020
VRE 7030
VNI 111
VNI 200
VNI 205L
VNI 211L
VEV 905
VEV 952
VEV 962
VAT 600 - ABNT
- Brazil
- Brazil Stainless steel
Chemical composition % of the ladle analysis of grade VAT 601
| C(％) | S(％) | Mo(％) |
| 0.05 | 22.5 | 61.00 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 459 (≥) | 236 (≥) | 14 | 14 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 343 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 649 (≥) | 367 (≥) | 34 | 34 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 241 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 249 | 888 | 359 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 240 S30601 | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| A 959 S30601 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
||
| S30601 | Austenitic Chromium Nickel Stainless Steel |
||
| SA-240 S30601 | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| NCF 601 | Corrosion-resisting and heat-resisting superalloy bars |
||
| NCF 601 | Corrosion-resisting and heat-resisting superalloy plates and sheets |
||
| NCF601 | Corrosion - resisting and heat - resisting superalloy plates and sheets |
||
| NCF601 | CNS Standard heat resistant alloy and corrosion resistant alloy bar and plate type and chemical composition |
||
| D3 | Cold-Work Tool Steel |
||
| T60601 | Carbon Wolfram Tool Steel |
||
| T60601 | Carbon Wolfram Tool Steel |
||
| X165CrMoV12 | High alloyed CrMoV steel for cutting tool and cold work tool steel |
||
| 1.2601 | High alloyed CrMoV steel for cutting tool and cold work tool steel |
||
| SKD-11 | Mainly used for cold working mold: gauge, die for thread rolling, cutting tool for metal, forming roll, die for press. |
||
| SS 2310 | Cold work die steel, steel hardenability, quenching tempering hardness, wear resistance, strength are higher than the Cr12.Shape is complex, |
||
| X12M | Cold work die steel, steel hardenability, quenching tempering hardness, wear resistance, strength are higher than the Cr12.Shape is complex, |
||
| X160CrMoV12 / Z160CDV12 | Cold working alloy tool steels |
Relevant products
VAT 601 Equivalent Grade Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| Cr12MoV | 12-160(T)*310-610(W)*L | Plate or Sheet | Tons | 12.38 | Hot-Rolled+Annealed+black | Enquiry |
| 1.2601 | 12-160(T)*310-610(W)*L | Plate or Sheet | Tons | 11.22 | Hot-Rolled+Annealed+black | Enquiry |