ABNT VN 2888 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » VN 2888
Sinter30
Sinter60
VW-9
VFCW
VH-13
VPC
VCM
VCM A
VCO
VMO - ABNT
- Brazil
- Brazil Stainless steel
Chemical composition % of the ladle analysis of grade VN 2888
| C(％) | P(％) | S(％) | Cr(％) | V(%) | W(%) |
| 0.2 | 10 | 9 | 2.5 | 0.25 | 4t 00 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 354 (≥) | 818 (≥) | 34 | 33 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 323 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 945 (≥) | 748 (≥) | 42 | 22 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 432 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 648 | 216 | 144 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 2Cr12MoVNbN | Heat-resisting steel bars |
||
| 2Cr11NiMoNbVN | Steels of blade for steam turbine |
||
| S47450 | Steels of blade for steam turbine |
||
| S47670 | Steels of blade for steam turbine |
||
| X 19 CrMoNbVN 11-1 | Stainless steels - Part 1: list of stainless steels |
||
| X 19 CrMoVNbN 11 1 | Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications |
||
| 1.4913 | Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications |
||
| X19CrMoNbVN11-1 | Creep resisting steels, nickel and cobalt alloys |
||
| 1.4913 | Creep resisting steels, nickel and cobalt alloys |
||
| Z60CMDVNb21-10Az | Valve steels and alloys for internal combustion engines |
||
| X10CrMoVNb9-1 | Alloy special martensitic creep-resisting steel |
||
| X19CrMoVNbN11-1 | Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications |
||
| 1.4913 | Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications |
||
| 1Cr12Ni3Mo2VN | Specification for stainless steel cold rolled sheet for aviation |
||
| X10CrWMoVNb9 | Boiler tubes are used in heat exchange appliances in which the energy is transferred from one medium to the other. The pipes are manufactured from carbon and low-alloy steel grades which are resistant to loads under high pressure and temperatures. They ar |
||
| Z12CNDV12 Air 9160/C | wrought steels used in aeronautical constructions |
||
| X19CrMoNbVN11-1,1.4913 | Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications |
