AFNOR X19CrMoNbVN11-1 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » X19CrMoNbVN11-1
X6CrNi18-10
X6CrNiMoB17-12-2
X6CrNiTiB18-10
X6NiCrTiMoB25-15-2
X7CrNiMoBNb16-6
X8Ni9
X10CrNiMoMnNbVB15-10-1
X12CrNiMoV12-3
X12Ni5
X15CrMo5-1 - AFNOR
- France
- Fasteners with stainless steel and nickel alloy for high temperature and low temperature (NF-EN 10269(1999))
Chemical composition % of the ladle analysis of grade X19CrMoNbVN11-1
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) |
| 0.17-0.23 | Max 0.50 | 0.40-0.90 | Max 0.025 | Max 0.015 | 10.0-11.5 | 0.20-0.60 | 0.50-0.80 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 446 (≥) | 683 (≥) | 12 | 23 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 411 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 186 (≥) | 252 (≥) | 31 | 24 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 431 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 599 | 824 | 499 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| X 19 CrMoNbVN 11-1 | Stainless steels - Part 1: list of stainless steels |
||
| X19CrMoNbVN11-1 | Creep resisting steels, nickel and cobalt alloys |
||
| 1.4913 | Creep resisting steels, nickel and cobalt alloys |
||
| X19CrMoNbVN11-1,1.4913 | Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications |