AFNOR X39Cr13 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » X39Cr13
1.4605
1.4509
X2CrMoTi29-4
1.4592
X12Cr13
1.4006
X20Cr13(AFNOR)
1.4021
X30Cr13
1.4028 - AFNOR
- France
- Martensite And Precipitation Hardening
Chemical composition % of the ladle analysis of grade X39Cr13
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) |
| 0.36-0.42 | Max 1.00 | Max 1.00 | Max 0.040 | Max 0.015 | 12.50-14.50 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 384 (≥) | 843 (≥) | 12 | 44 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 321 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 157 (≥) | 626 (≥) | 44 | 12 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 132 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 112 | 619 | 319 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| X39Cr13 | Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes |
||
| 1.4031 | Stainless steels - Technical delivery conditions for drawn wire |
||
| X39Cr13 | Stainless steel strip for springs - Technical delivery conditions |
||
| 1.4031 | Stainless steel strip for springs - Technical delivery conditions |
||
| X39Cr13 | Stainless steel strip for springs - Technical delivery conditions |
||
| 1.4031 | Stainless steel strip for springs - Technical delivery conditions |
||
| X45Cr13 | Corrosion-resistant high-temperature steel |
||
| 1.3541 | Corrosion-resistant high-temperature steel |
||
| X39Cr13 | Stainless steels - Chemical composition |