GBT 460 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » 460
L13455
L13703
L13704
L13705
L14203
L14204
L14205
320
360
410 - GBT
- China
- China structural steel and alloy steel
Chemical composition % of the ladle analysis of grade 460
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | Cu(%) |
| Max 0.22 | Max 0.35 | 0.80-1.40 | 0.035 | 0.035 | 0.25 | 0.3 | 0.1 | 0.3 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 683 (≥) | 975 (≥) | 12 | 23 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 231 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 257 (≥) | 132 (≥) | 24 | 31 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 333 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 366 | 758 | 872 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| S21460 | Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
||
| A 176 S44600 | Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip |
||
| A 268 S44600 | Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
||
| A 276 S44600 | Stainless Steel Bars and Shapes |
||
| A 314 S44600 | Stainless Steel Billets and Bars for Forging |
||
| A 473 S44600 | Stainless Steel Forgings |
||
| A 580 S44600 | Stainless Steel Wire |
||
| S44600 | Ferritic Cr Heat Resisting Steel |
||
| SA-268 S44600-1 | Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
||
| SA-268 S44600-2 | Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
||
| X3CrNiMoN27-5-2 | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
||
| 1.4460 | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
||
| X2CrAlTi18-2 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
||
| 1.4605 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
||
| 2.4605 | The chemically stable and high-temperature resistant nickel and cobalt alloy 2.4605 (alloy 59) is mainly used in the chemical industry, flue gas desulphurating plants, paper industry. |
||
| Alloy 59 | The chemically stable and high-temperature resistant nickel and cobalt alloy 2.4605 (alloy 59) is mainly used in the chemical industry, flue gas desulphurating plants, paper industry. |
||
| NiCr23Mo16Al | The chemically stable and high-temperature resistant nickel and cobalt alloy 2.4605 (alloy 59) is mainly used in the chemical industry, flue gas desulphurating plants, paper industry. |
||
| 1.4605(EN) | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
||
| 1.0460 | Non-alloy quality steel |
||
| P250GH | Non-alloy quality steel |
