CNS Austenitic 330 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » Austenitic 330
CNS 410
CNS 410S
CNS 421J1
CNS 420J2
CNS 429J1
CNS 440A
304-TPD
316-TPD
Austenitic 309
Austenitic 310 - CNS
- China
- China Taiwan Heat-Resistant Steel
Chemical composition % of the ladle analysis of grade Austenitic 330
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) |
| Max 0.15 | Max 1.50 | Max 2.00 | 0.04 | 0.03 | 14.0-17.0 | 33.0-37.0 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 991 (≥) | 355 (≥) | 34 | 12 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 241 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 412 (≥) | 359 (≥) | 21 | 43 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 124 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 678 | 462 | 764 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| B 511 N08330 | Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes |
||
| B 512 N08330 | Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars |
||
| B 535 N08330 | Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube |
||
| B 536 N08330 | Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip |
||
| B 546 N08330 | Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
||
| B 710 N08330 | Nickel-Iron-Chromium-Silicon Alloy Welded Pipe |
||
| B 739 N08330 | Nickel-Iron-Chromium-Silicon Alloy Welded Tube |
||
| N08330 | Ni-Fe-Cr Alloy Solid Solution Strengthened |
||
| SB-511 N08330 | Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes |
||
| SB-535 N08330 | Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube |
||
| SB-536 N08330 | Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip |
||
| SB-710 N08330 | Nickel-Iron-Chromium-Silicon Alloy Welded Pipe |
||
| RA 330 | Wrought nickel and nickel-related alloys |
||
| RA 330 | Special Purpose Alloys ("Superalloys") |
||
| RA 330 | Wrought Nickel and Nickel-Related Alloys |
||
| SUH 330 | Stainless steel wires |
||
| SUH 330 | Heat-resisting steel bars and wire rods |
||
| SUH 330 | Heat-resisting steel plate, sheet and strip |
||
| STR330 | Heat - resisting steel plates and sheets |
||
| SUH330 | CNS standard heat resistant steel bar steel grade and chemical composition |