ASTM S6 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » S6
T31507
S1
ASTM A182 F55
T41901
S2
T41902
S4
T41904
S5
T41905 - ASTM
- USA
- Alloy tool steel
Chemical composition % of the ladle analysis of grade S6
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Mo(％) | V(%) |
| 0.40～0.50 | 2.00～2.50 | 1.20～1.50 | ≤0.030 | ≤0.030 | 1.20～1.50 | 0.30～0.50 | 0.20～0.40 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 816 (≥) | 724 (≥) | 31 | 43 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 342 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 755 (≥) | 952 (≥) | 12 | 24 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 122 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 828 | 152 | 516 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| S63198 | Iron Base Superalloy |
||
| S66220 | Iron Base Superalloy |
||
| A 959 S66286 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
||
| S66286 | Iron Base Superalloy |
||
| S63198 | Iron Base Superalloy |
||
| HNVl | Steel for intake valves |
||
| S64005 | Steel for intake valves |
||
| HNV2 | Steel for intake valves |
||
| S64006 | Steel for intake valves |
||
| HNV3 | Steel for intake valves |
||
| S65007 | Steel for intake valves |
||
| HNV5 | Steel for intake valves |
||
| S63005 | Steel for intake valves |
||
| HNV6 | Steel for intake valves |
||
| S65006 | Steel for intake valves |
||
| EV3 | Steel for exhaust valves |
||
| S63016 | Steel for exhaust valves |
||
| EV4 | Steel for exhaust valves |
||
| S63017 | Steel for exhaust valves |
||
| EV5 | Steel for exhaust valves |
Relevant products
S6 Equivalent Grade Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| SA-437 Grade B4B/SUS 616 /422 Forged Bar | Dia.160xL | Round Bar | Kgs | 2120 | Forged+QT | Enquiry |