CNS Ferrite 409 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » Ferrite 409
CNS 429J1
CNS 440A
304-TPD
316-TPD
Austenitic 309
Austenitic 310
Austenitic 330
Austenitic 660
Austenitic 661
Ferrite 21 - CNS
- China
- China Taiwan Heat-Resistant Steel
Chemical composition % of the ladle analysis of grade Ferrite 409
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Ti(%) |
| Max 0.08 | Max 1.00 | Max 1.00 | 0.04 | 0.03 | 10.5-11.75 | 0.60 | 6×C％Max 0.75 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 865 (≥) | 715 (≥) | 24 | 13 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 132 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 554 (≥) | 468 (≥) | 43 | 34 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 442 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 642 | 433 | 783 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 240 S30409 | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| A 249 S30409 | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
||
| A 358 S30409 | Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
||
| A 813 S30409 | Single- or Double-Welded Austenitic Stainless Steel Pipe |
||
| A 814 S30409 | Cold-Worked Welded Austenitic Stainless Steel Pipe |
||
| A 965 S30409 | Steel Forgings, Austenitic, for Pressure and High Temperature Parts |
||
| S30409 | Austenitic Chromium Nickel Stainless Steel |
||
| SA-240 S30409 | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| SA-358 S30409 | Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service |
||
| SA-813 S30409 | Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe |
||
| SA-814 S30409 | Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe |
||
| SA-965 S30409 | Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts |
||
| A 240 S40900 | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| A 268 S40900 | Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
||
| A 554 S40900 | Welded Stainless Steel Mechanical Tubing |
||
| S40900 | Ferritic Chromium Stainless Steel |
||
| SA-268 TP S40900 | Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
||
| A 493 S40940 | Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
||
| S40940 | Ferritic Chromium Stainless Steel with Columbium |
||
| A 176 S40945 | Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip |
