1.0832 low alloy seamless steel pipe
1.0832 low alloy seamless steel pipe properties and heat treatment forged piece, Including 1.0832 low alloy seamless steel pipe application and specifications, We have all specifications，Including 1.0832 low alloy seamless steel pipe steel plate, 1.0832 low alloy seamless steel pipe sheet, 1.0832 low alloy seamless steel pipe square steel, 1.0832 low alloy seamless steel pipe flat bar,1.0832 low alloy seamless steel pipe round bar,1.0832 low alloy seamless steel pipe forgings, we can own production and sales.
Introduction to Our Products:
Specialized high quality steel
We have the advantages of equipment, technologies and price
forged/hot rolling/ extrusion of steel
We can produce the 1.0832 low alloy seamless steel pipe has the following specifications:
Round bar steel: 1mm to 3000mm
Square-shape steel: 1mm to 2000mm
Plate steel:0.1mm to 2500mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-219 mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Chemical composition % of the ladle analysis of grade 1.0832 low alloy seamless steel pipe and Standards
1.0832 10831 DIN1629 4DIN1629 STS49STP T49 G3455 G3456 A210-C St52.4St52
Standard: BS 1139, BS 3059-2, JIS G3459-2004, J...
Grade: 10#-45#, Cr-Mo alloy, Mn-V alloy, 15NiCu...
Thickness: 1 - 80 mm
Section Shape: Round
Place of Origin: Tianjin China (Mainland)
Secondary Or Not: Non-secondary
Technique: Hot Rolled
Certification: BSI
Special Pipe: Thick Wall Pipe
Alloy Or Not: Is Alloy
1.0832 low alloy seamless steel pipe
Our company is professionally specializing in seamless pipe for more than 10 years and we have our own factory.We maily export alloy pipe,carbon pipe,oil casing pipe,etc.we always have large amount of stock to ensure timely delivery.We often cooperate with many outstanding steel Pipe Plants such as TPCO, Hengyang Steel,Baotou steel , Anshan steel etc.
some mechanical property
1.1.0832 low alloy seamless steel pipe
2.OD:6-1260mm WT:1-80mm
3.material:16Mn,P11,P91,12Cr1MoVG
4.length:fixed or random
Machining performance
Download 1.0832 low alloy seamless steel pipe the mechanical properties of the report, the report provides detailed performance analysis and application. Download >>
Principal Design Features
One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.
Machinability
Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.
Heat Treatment
CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.
Welding
Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.
Forging
Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.